Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We would to know what do the Rx digit '1'and Tx digit '#' mean, for example:*Aug 20 00:29:03.643: htsp_digit_ready_up(2/0:0(5)): Rx digit='1' :*Aug 20 00:29:03.643: r2_reg_generate_digits(2/0:0(5)): Tx digit '#' Which appears between the digit 3 and ...
I have a similar issue. Primary:FWSM# sho int vlan 247Interface Vlan247 "FAILOVER", is up, line protocol is up Hardware is EtherSVI Description: LAN/STATE Failover Interface MAC address 0008.7cba.8140, MTU 1500 IP address 192.16...
I agree, I was trying in the lab, instead to reproduce the fail, set the channel out of service. But the sonus did not set the channel in out, for the reason that you explain me. Thanks for your answer!
I dont have the output of "debug isdn q931" from the costumer, we have this scenario in a lab, because the fail appears with a costumer. In this lab we put the channel as "Out of service":IPT_ESC4(config)#interface Serial0/2/1:15 IPT_ESC4(config-if)#...
