Hi,
I need to migrate the mpls link to vpls. Currently we do have the CISCO1921/K9 where 10MB mpls link is terminated on both the routers and we need to migrate it to 100MB and 18MB VPLS link.
The specific location has below devices
Cisco VG224---...
ACS(SE)4.2 WLC (4402)5.1.163AD 2003 ServerCurrently we are using ACS to authenticate VPN user for two domain.In the same ACS we want to configure machine authentication + PEAP + Self Signed Certificate.Now clients are authenticated with a valid usern...
Can anyone help for securing voice WLAN?I want dedicated voice traffic flow in specific vlan no data traffic . Data traffic must drop if it is going through voice vlan.Can we use CA Certificate + PEAP +WPA +WPA 2 Authentication in 7925 Cisco IP Phone...
Hi Device details.WLC 4402: software version 5.2.178.0 AP 1140: AIR-LAP1141N-A-K9client using Intel wireless card N-SupportedCurrently I have configure the WLC to support 802.11n still. when user are connecting to the network the are connected by 802...
Hi, I have connected one PIX 515E to load balancer ,which is further conncted to router .I am able to get ping between PIX firewall and load balancer but the packets are not reaching to router.
Currently we are using WindowXP SP3.Client Configuration:1. network Authentication: WPA + TKIP2. EAP type: Protected EAP(PEAP)3. Authenticate as computer when computer information is available is (checked)4. Validated server certificate is (unchecked...
Can we able to use PEAP+CA certificate in voice WLAN authentication.how can i configure dedicated voice traffic in voice wlan. here we have a problem as few user using the voice cridential and login to the network through the laptop
Hi,Currently we have enabled WPA2+AES.Client laptop is not connected to network.Whenever we are selecting WPA+WPA2+AES +TKIP with 802.1x client are connecting with 54mbps.So what we need to do?