Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am running a PIX 515 6.1(2) configured for a small number of VPN clients. I want the VPN clients to automatically remember the login password so users don't have to type it each time (we have an application that periodically autoconnects). Whilst ...
I have a strange problem with a PIX 515 6.1(2).I have 3 VPN tunnels already set up. Whilst trying to configure a 4th the PIX stops passing all traffic. It happens specifically when I enter ANY "crypto map" command.undoing the command using "no cryp...
Hi,Every now and again my PIX 515 freezes completely and stops responding on the network completely. However, the failover unit doesn't kick in unless I physically switch off the box. Sometimes this is after a bunch of packets arrive from our perimi...
There is a work around I have found, however it compromises security. You can force the software to save the password by adding the option in the ini file and making it read only. However, this means the password is stored in the file in plain text...
DSL bandwidth is very often contended. That is to say that whilst the maximum bandwidth available to you is 1Mbps it may be shared between you and a number of other sites. Their usage will affect the bandwidth available to you at any one time. You...
Try the following links:http://www.cisco.com/warp/public/707/16.htmlhttp://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Internetworking:IPSechttp://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00800949c5.shtmlAnother good r...
You can get basic information with 'show traffic' (note that the statistics will be calculated from the last time 'clear traffic' was issued or the PIX was rebooted.A better option is to use some SNMP monitoring software such as MRTG, or for more com...
