About mishag

mishag · 08-06-2003

I am running a PIX 515 6.1(2) configured for a small number of VPN clients. I want the VPN clients to automatically remember the login password so users don't have to type it each time (we have an application that periodically autoconnects). Whilst ...

mishag · 03-11-2003

I have a strange problem with a PIX 515 6.1(2).I have 3 VPN tunnels already set up. Whilst trying to configure a 4th the PIX stops passing all traffic. It happens specifically when I enter ANY "crypto map" command.undoing the command using "no cryp...

mishag · 11-22-2001

Hi,Every now and again my PIX 515 freezes completely and stops responding on the network completely. However, the failover unit doesn't kick in unless I physically switch off the box. Sometimes this is after a bunch of packets arrive from our perimi...

mishag · 08-26-2003

There is a work around I have found, however it compromises security. You can force the software to save the password by adding the option in the ini file and making it read only. However, this means the password is stored in the file in plain text...

mishag · 08-06-2003

DSL bandwidth is very often contended. That is to say that whilst the maximum bandwidth available to you is 1Mbps it may be shared between you and a number of other sites. Their usage will affect the bandwidth available to you at any one time. You...

mishag · 08-06-2003

Try the following links:http://www.cisco.com/warp/public/707/16.htmlhttp://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Internetworking:IPSechttp://www.cisco.com/en/US/tech/tk583/tk372/technologies_tech_note09186a00800949c5.shtmlAnother good r...

mishag · 08-06-2003

You can get basic information with 'show traffic' (note that the statistics will be calculated from the last time 'clear traffic' was issued or the PIX was rebooted.A better option is to use some SNMP monitoring software such as MRTG, or for more com...

mishag · 03-11-2003

Worked perfectly.Thank you very much.Kind regards,Misha

Member Since	‎11-22-2001 07:49 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	10

User Statistics

User Activity

Save Password on VPN Client with PIX

PIX stops passing all traffic on entering crypto command

PIX 515 Freeze - Doesn't Failover

Re: Save Password on VPN Client with PIX

Re: VPN performance

Re: IPSec debug reference?

Re: PIX 515 throughput

Re: PIX stops passing all traffic on entering crypto command