My Cat5K got 3x% CPU utilization. There is around 2x% used for stpBPDUrx process. I have 48 VLANs in my network. My Cat5K is the core switch and trunk the VLANs to the distribution. How can I find which port the receive BPDU come into this Cat5K?
Hi Vanguard,When the problem occur, how did you fix it? Reboot the computer? Or just unplug the cable and replug it?Is there any log message in the switch indicate this problem?Please post your configuration./Michael
Hi Vanguard,If another host which connect to F0/40 experience the same problem, is there any non-default configuration on that interface? Please post your configuration./Michael
Hi Vanguard,I believe that you have to identify your problem occur at the computer side or switch side first. Please find out the answer of following question:1. Is there any other host connect to the same switch and same VLAN (301) experience the sa...
Hi e-mourad,Please make sure your router has a "IP classless" command in the configuration.In your configuration, there is several network classes (10.0.0.0, 192.168.101.0, 193.95.122.0 and 193.95.116.0) in your router. If a router is "classful", it ...
Hi Glen,For your 3500XL, the latest version is 12.0(5)WC9. There is not any open caveat in this release.For your 6506, please describe your hardware platform and existing version clearly. For example, are you using Sup1 or Sup2? Are you using MSFC1 o...
