Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,ACS 4.12x 3030 Concentrators ver 4.7I am having problems with admin access to our backup VPN c3030 via TACACS. Scenario: We have one live and one backup c3030. They will be configured to VRRP failover in the event of a failure on the live c3030. T...
PIX 525 7.2ASDM 5.2Hi,I have a question regarding limiting access to our PIX 525 via ASDM. Currently there are 5 users with Admin access via ASDM(3x full admin and 2x junior admin). All normal/restricted access works fine but what we want to look at...
Hi all, I have inherited a network using DLSw and have limited experience. Previously all the traffic has been via TCP/2065 on Point to Point WAN or MPLS links through a PIX firewall. We have just started to test passing DLSw over IPSec VPN tunnels...
Hi Prem,I decided to go through all the config again and have fixed the issue. Going back to your post yesterday re; local users. Even though there are only 2 local users enabled, the old admin local user had the aaa level of 15 defined. I removed th...
Hi Prem,Hhhm, the ACS reports "Public interface" under the "NAS-Port" column but the IP address # under "NAS-IP Address" is the actual private IP address. This is the same for both live and backup passed authentications. Is this correct?Regarding the...
Hi Prem, many thanks for the quick response!VRRP is not enabled on both the 3030's at this stage as I wanted to make sure full admin access is available before enabling. Typically, the ACS log does not show much. The initial login shows as being pass...
