Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to setup my Cisco 2800 for SRST. According to Cisco documentations, one of the requirements for SRST is to enable DHCP option 150 with the IP address of the CallManager as the TFTP server.If SRST is used when the CallManager is unreachabl...
We have a WLAN Controller 4402, with firmware version 4.0.206.0. The ports are connected to 2 separate switches. 'ap-manager' is on port 1, and 'ap-manager 2' is on port 2. The wireless network is running fine when both ports are connected. However, ...
Thanks for the reply.What happens if an IP phone reboot during a WAN outage? I know that the phone will be assigned an IP address because of the DHCP service enabled on the SRST router, but does the option 150 have any purpose in this case? Does the ...
Currently, I have the 2 ports setup (temporarily) as LAG as well. It works fine on this setup. But I found from another Cisco documentation that this configuration is not recommended if the controller's neighbor are 2 separate switches. Any pros and ...
