Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've a host in the same subnet as the Concentrator's public interface. When the packet is decrypted, would it route out to the public interface since the host is on the same subnet as the concentrator's public interface? Would the concentrator ignore...
Does all IOS support the above? Do I need to look for the feature set that support it? Which version and above uses this command "crypto key pubkey-chain dss" and which version and below uses the old command "crypto public-key"
did you configure these 3 attributes? You must set them so that the VLAN ID/Name can be assigned correctly. And on the switch you must include AAA network too.IETF 64 (Tunnel Type)Set this to VLANIETF 65 (Tunnel Medium Type) Set this to 802IETF 81 (T...
Hi Alberto,It definitely works on native Windows as I have it in production. I'm not familiar with CTA but I thought it should work on the same principle. I suggest you first test out on pure Windows XP supplicant to confirm the VLAN assignment is wo...
Hi Dan,If your box doesn't support USB, I'm sure you can copy out the cert using other methods. I'm not familiar with MCS appliance but I'd think it should be the same. As far as the interface is concern.Good luck!Cheers,Phoon
Hi Dan,You need to copy out the root certificate and install on the client. You should have a copy when you generate the self-signed cert on the ACS. Two ways to install the cert on the client. You could copy the cert on the thumb drive and install m...
