Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings,
My Customer is in the middle of migrating multiple sites from AireOS (5508) to IOS (9800) WLCs.
Most sites work fine and guest users are serviced by the LobbyAdmin feature and local web-auth on the 9800 controller.
Some APs are yet to be r...
We're about to deploy Cisco ISE to a customer site and they have asked the question..."Will ISE work with a Group Managed Service Account? These are service accounts that have their passwords changed periodically."Now, I'm assuming that if the pas...
I re-imaged the box, after a hardware failure during an attempted upgrade. (3315 appliance)
Getting the error 'restore failed: Wrong encryption key or corrupted download from repository'
I've tried repo's based on FTP and local disk. all fail.
I've a...
Hi, My customer has banned TFTP from the network. Not a problem, I just use FTP. This works for most file operations on the controller (Software Upgrades, Config backups, etc.). However, to increase the AP count, which the customer does repeatedly wh...
Hi,My customer is running 5508's with AP groups.So that new AP's don't transmit the SSID's before I'm ready, I've enabled the 'Out-of-box' feature, which places the AP's into a new group, which is system configured with the radios ...
Thank you for replying so quickly @Mark Elsen
But am I correct in thinking if a client registers on say the 5508 Portal then roams across to a 9800 homed AP, they should stay connected? Assuming of course that the mobility tunnels are up.
I think I am hitting this bug as well. Upgraded from 2.7 to 3.0.0.458 and patched to level 2.I wondered if ISE 3.0 was still too 'new' to upgrade to. But my customer wants agentless posture which only 3.0 can do.I can't access the licencing page and ...
I'm looking to do the same thing, only I'm replacing a customers existing Bridge link based on the older BR1300 models That I installed some 15 years ago and has only now just failed.Here is a great link on how to do it with 1562's...https://www.cisc...
Thank you Dino,
Very Helpful.
My question around hostnames could have been a bit clearer.
What I meant was that the 2 authentication methods (Corporate EAP and Guest Web-Auth) are on different domains and each has certificates to match those. e.g. ...
I have a similar problem, although my 2 clusters are in the same sites.
One is providing guest portal functionality (2 nodes cluster) and the other is doing the EAP for the 'internal' clients (again 2 nodes)
I want to merge the 2 into one, 4 node clu...
