Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allI have a cache that talks wccp v2. The router that redirects the traffic is a CISCO 7500 with 3 VIP 4-50 and 1 VIP 4-80 with dCEF on. I can´t be able to know why the cpu boost from 7% to 55% when I activate the ip wccp an I redirect traffic to ...
HiI have an E3 line that i have started to test, but it seems to be impossible to make it work, here is the config:interface Serial1/1/0 ip address x.x.x.x 255.255.255.252 no ip route-cache distributed framing g751 dsu bandwidth 34010(I have tried to...
Hi, I have two 5505 Catalyst connected with a 4 port trunk. Now I have purchased a 9 gigabit port card for each one to quit the bottleneck between them. But when i connected the gigabit wire between catalyst, it caused a slow down in the network, som...
Hi, I don´t have RSM installed. I also tried to change the GBIC without success.These are the soft version for the catalysts (both of them), :Hardware Version: 1.0 Model: WS-C5505 Serial #: 066580322Mod Port Model Serial # Versions--- ---- --...
