Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Anyone seen the following problem?I've set it up for WPA-Enterprise (TKIP) and we get all the way through the authentication and the 4-way handshake, and then it sends me a group key which looks like this:0xaa 0xaa 0x03 0x00 0x00 0x00 0x88 0x8e 0x01 ...
Hi,If I plug a 4400 WLC into a 3750 switch and look at the topology on Network Assistant connected to the switch I should actually see the WLC, shouldn't I?It doesn't appear.I believe I've configured the management interface and ports correctly on th...
Is the Cisco IAPP protocol specified anywhere?The only documentation I can find is contained within the Cisco CCX specifications. This is rather piecemeal and mixed up with all the other CCX stuff.I assume there is a specification on the Cisco IAPP p...
In order to test CCX Radio Measurements (S36) one is required to enter a "hidden" test command into the CLI of an access point: test aprm mreq client .....as per Appendix K of the CCX Test Plan 1-4.This should force the access point to generate a...
Thanks, Jake, for your replies.It isn't that we haven't been working with other contacts, just that this forum was another channel to try in the hope that someone would have a quick answer.To be honest, we are a "partner" but still find it hard to ge...
IAPP perhaps, but Cisco IAPP is still in use as part of the CCX Cisco extentions to 802.11.Cisco tests third party equipment against it in their compliance tests.One would have though Cisco would have documented it for use by those third parties (of ...
Unfortunately, "Cisco IAPP" is not the same thing as "IAPP" (802.11F).If it was I'd be happy as yes, 802.11F is nicely documented.Cisco IAPP is a proprietary protocol and a different beast altogether.Thanks anyway, but I'm still looking for a Cisco ...
Thank you for your reply.That command didn't work either. It consistently reports "Invalid input detected at '^' marker."With the marker pointed at the letter p in "aprm".I thought that the version I have 12.3(8)JA2 is more recent than 12.3(2)JA, but...
