About CGS Service Desk

CGS Service Desk · 04-20-2021

Hi everyone, I'm having some trouble with output drops that maybe someone would be kind enough to check over for me. The map for this section is here https://imgur.com/a/baPYoxb I have 2x 2960 connected to 2x Nexus 3500 via 4x Fibre, as I make adjust...

CGS Service Desk · 06-12-2012

When we replaced our Nortel 8600s with Catalyst 4507s last year we also purchased LMS as a replacement to Nortel's Enterprise Switch Manager. ESM was extremely easy to configure and use but LMS seemed overly complicated in comparision. I installed it...

CGS Service Desk · 04-28-2021

I have adjusted the load balancing to;port-channel load-balance src-dst-ip The drops have lowered drastically but still climbs (on all 4 ports instead of 1 now). It's good enough at this stage as I'm looking to lower the traffic through that switch.

CGS Service Desk · 04-20-2021

Hi Leo, No QOS on the 2960, the configuration is very standard for a L2 device. I believe the Nexus is also fairly out of the box for QOS but would have to dig into what the default configuration normally is as these are the first Nexus devices I've...

CGS Service Desk · 04-20-2021

Hi Leo, Thank you for the response, I'll add those commands below. I originally thought it was L1 after checking configuration which is why the port channel now has 4 interfaces. I doubled up to remove connections but found interfaces that had no dro...

Member Since	‎06-12-2012 10:59 PM
Date Last Visited	‎04-28-2021 11:28 PM
Posts	5

User Statistics

User Activity

PortChannel Output Drops

Installing LMS problems

Re: PortChannel Output Drops

Re: PortChannel Output Drops

Re: PortChannel Output Drops