Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Mobility express 8.3.104.131 beta upgrade from 8.3.102.0 fails on 1832i -Flash memory is full. I downloaded the ap bundle for mobility express and attempted to upgrade via http. The ap on show flash indicates that flash is full. Is there a differ...
I have been testing mobility express 8.3.102.0 on a 1832i access point. The web management gui keeps crashing. I can recover by factory reset for a time. I have tried it on different aps with the same result. Is there a way to restart tomcat kind...
WLSE rogue access point suppression is shutting down the port channel to the whole switch instead of the port where the rogue is connected. Is the WLSE suppression not granular enough, or do I have something mis configured? I am running WLSE 2.9 in...
What is the difference between the IETF session timeout value and the aironet session timeout value? I have all cisco access points with mixed clients. Do I need to enable the IETF timeout in addition to the aironet session timeout to force a new s...
I would like to reboot my access points once weekly on a recuring basis using the WLSE. I have tried using the custom commands in the config template, but it won't take the reload confirmation. Am I missing something here?
The web interface GUI gets disabled when config network mgmt-via-wireless disabled is active. Perhaps this is expected but not documented anywhere I found. The ssh console remains active either way. Running 8.3.112.0 code.
Mobility express documentation is a bit spotty. You need to extract the AP specific firmware from the bundle. This will be the ap1g4 file in my case. You "should " be able to extract that from the file. It is small enough then to load into flash....
The problem has been solved by upgrading firmware to 8.3.111.0 and resetting to defaults. If I tried to reset then import the old configs, the web page would crash. I recreated everything manually vs importing the config and things seem to be pret...
I am interested in your post regarding the Novell CA and Microsoft CA. I have been having problems getting PEAP MSchapv2 to work. I am using a netware generated certificate, organiazational CA on the ACS. Could you provide more detail on the diffe...
Here are the debug posts you requested. I did disable WPA and have enabled mandatory WEP on this SSID. Open with WEP key provided automatic with dot1x MSCHAPv2 selected, and no machine authorization.debug dot dot 0 trace print xmt rcv debug radius ...
