Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allgot BIP connection from ISP, with block of public ip's (100.100.100.1/30)PE end : 80.80.80.1 /30CE end : 80.80.80.2 /30There is server on the LAN side which I want to be accessed via public IP 100.100.100.2how can i go about setting this using ...
Hi allgot BIP connection from ISP, with block of public ip's (100.100.100.1/30)PE: 80.80.80.1 /30CE: 80.80.80.2 /30there is server on the LAN side which I want to be accessed via public IP 100.100.100.2how can i go about setting this using just 1 box...
Hi Alex did you ever got the answer to this ? /got resolved ?I am having problem getting X2-10GB-T to work on the same SW WS-C3560E-12DSMar 30 01:30:13.675: %PM-4-ERR_DISABLE: gbic-invalid error detected on Te0/1, putting Te0/1 in err-disable stateM...
Hi AllI had exactly the same issue with enabling just SSH accesss to the router for remote control.Only passing ssh traffic worked, inspecting would not work at all ...because of the following error :%Protocol ssh configured in class-map classSSH can...
Hiyayes the server can be reached no problem on ports 25, 80 etc....this was very easy solution, just add ip 100.100.100.2/30 to interface facing WAN - > FastEthernet0/1That worked,Thank for looked at this
HiFurther to my description of the problem please see how ping and traceroutes looks like:C:\user>ping 100.100.100.2Pinging 100.100.100.2 with 32 bytes of data:Reply from 80.80.80.2: TTL expired in transit.Reply from 80.80.80.2: TTL expired in transi...
