Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,Have a question about trunking on an ASA5510. Here is my setup.3Com switch VLAN300 = ports 5-8 and VLAN301 = ports 9-12. I have both VLANs trunked to port 13. ASA5510 VLAN300 on ethernet0/3.300 and VLAN301 on ethernet0/3.301. Port 13 on the 3C...
Hi All,I just purchased a new ASA5510 to replace our old firewall. With help from experts in the forum, the device is configured to have an inside, outside and dmz interfaces. Now here's my question, how should/do i subnet my IP block?My ISP has give...
Hi all,I've just purchased an ASA5510 w/IPS to replace my current firewall box. My ISP has given me a block of 30 IPs xx.xx.xx.yy/27. I've created 2 interfaces for LAN IP: 192.168.xx.yy and WAN: xx.xx.xx.yy (using one of the IPs from my block). PAT i...
Hi Chris,Thanks for the info. I tried the command "encapsulation..." but it came up with the same error. I was doing more research and apparently the ASA will automatically trunk the physical interface if more than 1 VLAN is added on that inteface. h...
Hi Jon,Thanks for your reply.Does this look right? Or should I be putting the 3 perimeter devices and the machines with one to one NAT (inside, outside) on the same subnet?EDIT: the IP for VPN-1 should be 111.111.111.35/29
Hi acomiskey,Thanks! now it is working! but how come i have to specify the outside ip rather than the inside subnet?access-list outside_access_in extended permit icmp any 10.10.10.0 255.255.255.0 echo-reply above doesnt work... but the following wor...
Hi JP!Thanks for your reply. Yes, the 196 and 198 were typos in this post... i was looking at the management screen and mistyped on the computer i was posting on... my appologies. inside ip: 10.10.10.254 255.255.255.0outside ip: 196.65.65.14 255.255....
