Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello:I have scenario where the customer wants to FWSM configured for intra-switch and inter-switch failover. Here is an example:Core Switches - 6509-A and 6509-BFWSM Modules in 6509-A -> FWSM-A-1 and FWSM-A-2FWSM Modules in 6509-B -> FWSM-B-1 and FW...
Hello:I am having problem with the CCAAgent download page. When users access resources on the network, for the first time, they are directed to the Weblogin page without an option to download the CCAAgent. My environment is OOB virtual gateway with H...
Hello:I am in the process of configuring the IPSec remote access vpn on the ASA (ver 7.2). I would like the VPN clients to obtaing the IP address from our internal DHCP server (Microsoft AD environment). Is this possible and if it is can someone dire...
Hello:I little confused on the "device credential" option when I am adding a device to the CSM. Is this credential same as I use to log in via ssh or http to ASA and FWSM? Do I also need to give the enable password somewhere when I am adding the devi...
Hello:When I try to remove an access-list with the "no" command it doesn't remove that entry! I am not sure what I am doing worng here...for example, if I enter:no access-list test permit IP any anyI still see this entry in the running config.any tho...
All access switch ports must be configured with only Auth VLAN (not access/trusted VLAN). Once the client is authorized, depending on the port profile, the CAM will instruct the switch (via SNMP) to change the port a trusted VLAN.
It depends who you ask!!!. I ran into a problem last week on a similar setup and worked with Cisco TAC to resolve the issue. We were not able to get the ADSSO working for wired users - VPNSSO is working fine for wireless users. Finally the TAC told m...
