Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All, Hello, In our company's LAN we have a Cisco Catalyst 6509-E switch as our backbone switch with a WS-SUP720-3B supervisor engine and IOS ver 12.2.33 SXH The problem is that we want to enable DHCP service so that the backbone switch access a ...
hi all, In our company we have an IBM main frame which uses token ring and we want to connect it to the rest of our network segments which use ethernetI read about translational bridge but I can not find any details about current existed solution I m...
Hi everybody, the problem is that i have a MITEL SX-2000 BPX in our company which is intended to be part of the VOIP system and when the configuration was made on the router it was found that some factors are missing to make the router understand the...
hello everybody,the problem is that when I verified the status of interface vlan 1 on switch 2950 I found that interface is up and line protocol is downI can't find an explanation for thatcan any one help me?thank you
the problem is that I have a switch 2900 xl seires and I can not make a telnet to itin my network the management vlan is vlan no 6 so i had to assign ip address to the interface vlan 6 on that switchI did that but it remained shut down despite being ...
I am located in EgyptI've been told and I think that the tones are related to the PBX model which is Mitel sx-2000what I found at the URL was PSTN database
Hi Raj,yes ofcourse i configured vty lines and set the password but the problem still existsi think that the problem is related to the fact that i set interface vlan 1 as the management interface whereas it should be interface vlan 6 which i can not ...
