Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have seen several aironets reporting that the "Last Activity Time (secs)" of a wireless client is greater than the "Activity TimeOut (sec)" for the same station.I have seen many clients listed as having a "Last Activity Time" of over 3 weeks.Is the...
Hello,We have a 6509 which is generating vlanTrunkPortDynamicStatus trap messages at irregular intervals (around 1 per day). The first trap shows the interface has changed to 'noTrunking' followed by another trap 6 seconds later with the status of 't...
We have a VTP domain with one master switch connected to several downstream switches. The domain has vtp pruning enabled.One switch wrongly prunes back vlans from the trunk which are active on the switch.I am having trouble finding an in-depth explai...
Hello,I cannot find a great deal of documentation about exactly how the pathcost method operates.We have a 6509 connecting to a 4006 which in turn connects to several 3550's. The 6509 and the 4006 are in the same MST domain and the 4006/3550's are in...
I have an MST region with istance 1 mapped to vlans 1-500. The MST boundary switch has an interface which connects to another switch running PVST.My question is, when a BPDU is sent from within the MST instance 1 for VLAN 45 (for example), will the P...
Thank you for your reply.Data is being sent in both directions and UDLD is currently reporting the interface as bidirectional.The link is provided by single-mode fibre (to a 4006 switch), the link traverses several ducts to reach the destination, mak...
Hello, thanks for your reply.All switches are in VTP server mode. The revision number is correct and VTP must be working because I cleared the VLAN database, then changed the VTP domain and the VLAN database was learned from the other switches. All V...
Hi Francois,Thanks again for your thoughrough response.Unfortuanately, I do not have the exact output during the failure, but I will explain the best I can.At certain times (usually after a reboot from what I can tell), the "Type" field shown with "s...
Hello Francois,Thank you for your reply.The "deafult" I was referrring to meant that they act this way without modifying their config, so its quite possible that its based on software revision rather than platform.What do you mean by race condition a...
