Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can device interface statistics be queried through the API? I am looking to obtain bandwidth stats on uplink interfaces. (in kbps) SNMP doesn't offer specific bandwidth usage stats in kbps, and doesn't offer a time value (like uptime) to accurately...
I will be deploying an ASA5520 very soon and I wanted to find out if the following is possible...and if so, any advice or pointers on the configuration.I plan to have three security zones:SERVER_NETWORK 10.0.0.0/24CLIENT_NETWORK 192.168.100.0/24PUBLI...
> Netflow traffic will only be coming from the MX per your network you have it setup for. But I understand what your saying Thank you, Nolan. I also found something which alluded to NETFLOW being sourced from the MX, only. Which is fine...for me...b...
> If you query the interface data volume every 60s then you can calculate the average bit rate. You don't need to worry about the timing on the device - you just need to time when you make your queries.For a brief, manual-effort analysis, that would ...
>Would netflow give you what you want?There's a lot of overhead and excess data for which I don't really care about in Netflow. As well, Netflow is enabled for the whole site. Not just an interface; or a specific device. It's enabled "network wide...
