Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have successively implemented a routed VLAN setup at our site with one problem. We need to be able to connect to a couple of hosts on a seperate network that is not in our control. These hosts are dual homed with the second NIC on our VLAN 2 Serve...
I have attached a pdf file of our current network diagram and a proposed network upgrade layout. We currently have a site with less than 50 workstations, a few servers and networked printers that are all hanging off of 2950T switches and all on the s...
How do I know what software is currently enabled on a 6509? I am trying to select an IOS to download to add a WS-X6408A-GBIC blade. We currently have:sh version WS-C6509 Software, Version NmpSW: 7.6(1)Copyright (c) 1995-2003 by Cisco SystemsNMP S/W c...
We just recently ran fiber to connect 2 more buildings and purchased a WS-X6724-SFP to connect them to our core 6509. I know this card requires us to upgrade our Sup2's to a Sup720. It appears we would then need to add a fan tray WS-C6K-9SLOT-FAN2. I...
I will give it a try. Can I add these to the existing ACL's?Here is what I have on the Main switch:snip========================================interface Vlan1 no ip address shutdown!interface Vlan2 description SERVERS ip address 172.17.2.254 255.255....
Jon,I have a spare 2950T and 3560G already and will try and get a basic setup going. I will post back if I run into any problems. Thanks for your help.Jim
I have one VPN tunnel from this PIX 501 to a PIX 515. I guess I didn't realize the 3560 would do this. I knew we would need a router to make the different vlans talk to each other or not and that is where I came up with the router in the diagram. S...
