Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,We have been having a very strange problem affecting a lot of users within our company and we are struggling to understand the underlying issue.Briefly, we have a range of switches (but mainly 2950's and 3750's) with various levels of IOS loca...
On one site we have 12 cisco AIR-AP1231G-E-K9 AP's running IOS Version 12.3(2)JA4. They are accessing a variety of applications from RF scanning to PDA's.this is standard across the company but we are having problems with 10 of these rebooting due to...
Hi Leo, as a standard we set the speed on switch and servers to 100/full, this has been the case across all our different types of switches/servers and for the majority it is OK. Because the problem is random we seem to have no particular pattern.Che...
Thanks Toshi, however whilst I can accept one or two may be cable problems, we have had over 70 servers in different locations affected by this and a simple shut/no shut resolves, iif it was cable, loose connection etc. I am not sure how this would r...
thanks John, I just actually added we do that as you posted. All servers are hardcoded, PC's for we get the problem on them as well are set to Auto as were advised to by Cisco.
thanks for the advice but we have over 100 AP's at different locations with the same version and AP and we do not have the same issue with any of these. This is why so far we have not reloaded the IOS.
