About brtaylor

brtaylor · 02-09-2011

How can I set up a Cisco 831 router (branch location) so that it will accept inbound VPN Client connections and initiate a site-to-site IPSec tunnel to our hub location that uses a VPN 3005 Concentrator? I could get the tunnel to work by configuring...

brtaylor · 12-19-2017

I was able to get this working using the CAB-PHD4XS2-SPLIT splitter. The UTP or STP RJ45 cable is a straight through cable except pins 3 and 6 need to be crossed. It would have been better if Cisco had done this in the splitter so a standard straig...

brtaylor · 02-09-2011

Hi Federico,Thanks that helped! Here's my final config:crypto isakmp client configuration group pengrp key ******* pool vpnpool acl 105crypto isakmp profile VPNclient description VPN clients profile match identity group pengrp client authentic...

brtaylor · 02-09-2011

Hi Federico,Thanks for the response. Here's what the router originally had. Does the static map automatically get bound to the dynamic map or is there a command to do that? Note the dynamic map is applied to the interface. Should it be the static...

Member Since	‎11-10-2009 08:57 AM
Date Last Visited	‎03-14-2021 11:27 AM
Posts	4

User Statistics

User Activity

How to setup VPN Client and site-to-site tunnel on Cisco 831

Re: Did you manage to find what

Re: How to setup VPN Client and site-to-site tunnel on Cisco 831

Re: How to setup VPN Client and site-to-site tunnel on Cisco 831