About shanegoodwin

shanegoodwin · 08-15-2007

A couple months ago we had this exact same problem, and this week it cropped up again.Users report that they will be able to connect to the VPN successfully, but later in the day they will try to connect and receive the message:Secure VPN connection ...

shanegoodwin · 08-20-2007

CONFIGURE TAB --> Addition Tasks (on left) --> Local Pools --> SDM_POOL_## --> Cache SizeI just changed mine to 10 since that's the pool size I have. I hope this fixes it.Also, under:CONFIGURE TAB --> VPN (on left) --> VPN --> VPN Components --> Easy...

shanegoodwin · 08-20-2007

I accessed this particular option through the GUI (SDM). Not sure where to find it in the CLI config.

shanegoodwin · 08-20-2007

It is somewhere in that area of the config. If you get to the properties of one of those items, there will be boxes to change values, etc.One of them is "Cache Size"

shanegoodwin · 08-20-2007

I think that is the answer!Pool Name Column The name of the IP address pool IP Address Range Column The IP address range for the selected pool. A range of 2.2.2.0 to 2.2.2.254 provides 255 addresses. Cache Size Column The size of the cache for this p...

shanegoodwin · 08-20-2007

The odd thing is, after I reset the router it goes away for a while. I'm wondering if it has to do with the "Cache Size" setting on the IP pool setup section of the VPN configuration. I'm not sure what the Cache Size means, but it is set to 20 and th...

Member Since	‎08-15-2007 05:32 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	6

User Statistics

User Activity

CISCO 1841 - VPN Error - Reason 433

Re: CISCO 1841 - VPN Error - Reason 433

Re: CISCO 1841 - VPN Error - Reason 433

Re: CISCO 1841 - VPN Error - Reason 433

Re: CISCO 1841 - VPN Error - Reason 433

Re: CISCO 1841 - VPN Error - Reason 433