Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have a remote site that is changing ISPs, I need to change the outside interface IP Address / Subnet Mask and the ASAs default gateway, how can I change all three remotely at the same time?
Have an ASA, running 8.04, with a L2L VPN tunnel built. The ASA has two interfaces with there subnets supposed to enter the tunnel if destined to 192.168.0.0 /24interface 1 - 192.168.3.0 /24Interface 2 - 10.12.37.0 /24Hosts from interface one can suc...
I have a requirement to allow multicast traffic from a workstation that connects to an ASA via a Remote Access VPN.Once authenticated to the ASA on the VPN they want to start a program that requires multicast in order to connect to a server also via ...
Scenario:-asa providing remote access vpn capabilities to customers users-customer wants 50 users added for vpn-customer does not want to make 50 passwords for users-customer does not want to know the user passwordsQuestion 1:Can the ASA be configure...
Folks I have a customer that has a requirement to track the IP Address a VPN user is assigned upon connecting to their ASA.I have looked at the 'logging list' and while that works by sending syslog messages it sends ipsec and ike which is a huge amou...
Steve,Any vpn can accomplish what you are wanting i.e. vpn users only RDP to their desktopIn the user attributes section of the config do the following:username USER attributes vpn-group-policy USERS-ACLwere the place you want thtem to go to is defin...
Yeah your getting the sales pitch.....Do this, call cisco tac 800-553-2447 tell them you need help TODAY with pix but you do not have a contract and that you would like to speak to someone in 'entitlements' in order to purchase one as you do not hav...
