Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I've read the NTP section of the user guide for the Catalyst 3750, but was unable to get a clear answer to the following.As far as I now it should be no problem configuring the 3750 model to synchronize with a local NTP time server. The com...
Well, the Windows 2003 servers are in a different subnet then the time servers. The Windows 2003 servers are part of a LAN that uses private addressing. The time servers are part of the client's subnet, which doesn't use private addressing.The proble...
True, but according to that same documentation, the 3750 can have an NTP peer association that enables the switch to synchronize OTHER devices and synchronize TO other devices.In my case, I want to see if the 3750 switch can synchronize to 2 atomic c...
I'm assuming you have synchronized with a Cisco switch/router? Did you configure anything in the switch itself.It looks like you also have to configure the switch, in my case the 3750, to establish a (NTP) connection with the machine that you want to...
According to the article posted by avmade, it seems that Windows 2000 used SNTP, but the Windows 2003 family used NTP.It looks like it should be possible for the Windows 2003 servers to synchronize with the 3750, if it is reachable.
Hi Jon,Thanks for the reply.We have two atomic clocks available to the 3750, but these are not reachable for the two servers that we have.I was planning to synchronize the 3750 with the atomic clocks and then let the two (windows 2003) servers synchr...