About stephentaylor

stephentaylor · 01-18-2008

After the SHOW BOOT command how do I set the "BOOT path-list:" to a null value and how do I set the "Config file:" to a value of "flash:config.text"?

stephentaylor · 09-25-2007

Is any person able to explain and propose a solution to the following?I have Windows XP Java Platform Standard Edition 6 version 1.6.0 (build 1.6.0_02-b06) installed and receive the following message when I enter the Cluster Management Suite via HTTP...

stephentaylor · 09-10-2007

Can you copy a Catalyst 3500XL existing IOS software using for example TFTP and if so how?The Cisco Catalyst 3500 series XL shows the message "The system is unable to boot automatically because there are no bootable files to boot"Also the "XMODEM: fl...

stephentaylor · 01-18-2008

Dear Dandy,The "no boot system" seems to have done the trick.I will rate the call on my return from vacation.Best Regards, Steve

stephentaylor · 01-18-2008

Dear Dandy,The set enable break from 1 (or yes) to 0 or (no); switch# config t switch(config-t)#no boot enable-break has worked OK.However the "BOOT path-list: flash:c3500XL-c3H2s-mz.120-5.WC3b.bin" still remains!

stephentaylor · 01-18-2008

Dear Dandy,This is a switch model Catalyst 3500 series XL model WS-C3534-XL-EN.I have now resolved one issue setting "Config file:" to "flash:config.text" by entering "configure terminal" mode followed by the "BOOT config-file flash:config.text" comm...

stephentaylor · 09-12-2007

Recovering from Corrupted SoftwareSwitch software can be corrupted during an upgrade, by downloading the wrong file to the switch, and by deleting the image file. In all these cases, the switch does not pass the power-on self-test (POST), and there i...

stephentaylor · 09-10-2007

Hi Leo,After reading the Release Notes 12.0(5)WC10 I am still unable to install the IOS software.I have been able to download the C3500 IOS Image software and save the file to my TFTP server. On powering on the Catalyst 3500XL it defaults to the "swi...

Member Since	‎09-10-2007 03:55 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	8

User Statistics

User Activity

How do I reset the values displayed by the SHOW BOOT command

Cluster Management Suite - Java Plug In Error

Can you copy a Catalyst 3500XL existing IOS software?

Re: How do I reset the values displayed by the SHOW BOOT command

Re: How do I reset the values displayed by the SHOW BOOT command

Re: How do I reset the values displayed by the SHOW BOOT command

Re: Can you copy a Catalyst 3500XL existing IOS software?

Re: Can you copy a Catalyst 3500XL existing IOS software?