Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
On 3850 configuration guide, I came across PAgP desirable mode is not supported in the switch stack (cross-stack EtherChannel).http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/layer2/configuration_guide/b_lay2_3se_3...
Hi David,
Good to hear it works well with ISE 1.4.
As from "Cisco Aironet Series 2800/3800 Access Point Deployment Guide", minimum ISE version is 2.0 for supporting AP 2800/3800.
Thanks.
Hi glen.grant,Thank you for your reply. This pagp limitation also applied to 3750 cross-stack etherchannel as well. Thought Cisco has made some improvements to 3850 to overcome this. If you read through these two Q&A for 3850 (cross-stack etherchanne...
Hi Carl,Can you share your experience how you solve the bpdu issue on the ASA?Right now, I'm having the same problem. I have tried using the Ethertype access-list to allow the bpdu, but still cannot. The hit-count on the access-list is not increased....
