Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When I follow directions to configure FT on my ACEs at:http://cisco.com/en/US/products/hw/modules/ps2706/products_configuration_guide_chapter09186a0080683a15.html#wp999520If you go to Table 7-1 on step 4. I cannot configure the vlan interface. When I...
I'm have difficulty understanding how to put my ACE blade in service. I have 1 vlan with external ips on my 6500 msfc. All the internal internal vlans default gateways on on my msfc as well (e.g. vlan 10 is 192.168.10.1). My plan is to create a new i...
Is there anyway to use the ACE to hash urls? It doesn't seem to be possible, but I was thinking maybe there was some kind of workaround. Many CDNs offer the service of hashing an URL and changing it at a fixed interval to offer a little extra protect...
I have been throw into the position of making a solution work that I had no part in ordering the hardware for. I have 2 6509s with an ACE module with the 16GBps license and an FWSM in each. From reading the datasheets for the ACE and FWSM, I find th...
syed when do you sleep?I was just logging on to say I got the peer relationship by setting the peer address to the ip of the other ACE which seems logical but read the documentation link above. It's just plain wrong. There is no need to create a vlan...
Ok I found the vlan issue was I entered the svclc vlan-group command before I created the vlan. I took out the vlan-group settings and put them back in and now vlan 100 is showing up on the ace. I still cannot see the peer ACE.lax-core-ace1/Admin# sh...
Ok. But won't having 2 routes on my server bypass the need for PBR on the MSFC? My default route points to ACE (to find internet connections from VIP) and I add a route for internal networks to go to MSFC.
