Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a server whose Health LED is amber, and UCSM is showing an F1237:Description: Health LED of server 7/1 shows error. Reason: DDR4_P1_A1_ECC:Sensor Threshold Crossed; DDR4_P1_A2_ECC:Sensor Threshold CrossedLast Transition for this fault is 2015-...
Yes, the day after starting this thread, I cleared the SEL 2 additional times, and each time, the 4 entries were written to the (otherwise empty) SEL, with time stamps as if they had occurred immediately after the SEL clearing, even though they say "...
Oh, and the DIMM error counters in the chassis (CIMC) show tech won't clear, even though I cleared the DIMM errors on each DIMM individually:Querying All IPMI Sensors:Sensor Name | Reading | Unit | Status | LNR | LC | LNC | ...
Not yet. I am waiting for authorization from the end customer to use the support contract associated with this hardware.My immediate puzzlement is why I cannot get rid of these SEL entries, in an effort to see if the errors return. They clearly say "...
I thought I should mention that both DIMM A1 and DIMM A2 show as "Operable" on the window used to reset memory errors for each DIMM, and they both also show "Operable" in the sam_techsupportinfo file from the UCSM tech support log: Server 7/1:... ...
