Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello Santosh Yes it does. Read this below :" The ACS 5.2 software runs either on a dedicated Cisco 1121 Secure Access Control System (CSACS-1121) appliance, or on a VMware server. However, ACS 5.2 continues to support CSACS-1120 appliances that you ...
Hello Vineeth yes, you are can do through GUI. On GUI :1. ACS gui > network configuration > click "search" and click "search" again. 2. Complete list of all network device will appear. On top, you will see an option to "download". Download the comple...
Hello Kurt The command on device shows that primary method is Tacacs and then, local. aaa authentication login default group tacacs+ localIs ACS server unreacable from device ? Does it fail on authentication ?thanksDevashree
Hello Matt Here you need to configure. [1] Configure group mapping of AD-groups with ACS server, in such a way as AD-1 ----> Group1 [acsgroup]AD-2 ----> Group2 [acsgroup][2] Configure group-lock feature on ACS server i.e enable class attribute. ...
