Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've got a customer running Unity Connection 11.5 and some users are getting quota errors despite having empty mailboxes. For example, my client forwarded me the below email notification but when I look in UConn their message count is 0. Has anyone...
In order to upload ISOs to my VMWare host I usually traverse a 100Mb switch and an ASA5505. This is painfully slow so I figured that temporarily putting my laptop in the same VLAN/subnet as my VMWare hosts would speed things up since my core switch ...
My client is running UCM 9.1 and I need to BAT in a bunch of VG224 ports. I was able to configure a gateway template for MGCP just like I did for my successful SCCP imports but now I'm trying to BAT in MGCP ports for fax and modem access but the BAT ...
Ever since Cisco discontinued the UC320 and UC500 I've been wary of ordering SPA phones for customers; however, there's no End-of-Life notice posted for any of the current SPA phones. Has Cisco ever stated publicly that they'll continue to offer SPA...
I have a client with just one (reported) phone that can't retrieve parked calls. LAN-to-LAN Park works ok but calls that come in on the PRI and get parked by this one particular hone can't be retrieved by it. Upon the retrieval attempt, the IP phon...
It's been a while since I wrapped up this project, but I think I was able to RMA the stack modules instead of the switches themselves. Despite having the same part numbers, the new ones worked fine. Maybe I got counterfeit knockoffs in the first ro...
Upgrading from 16.3(8) to 16.6(6) did not fix the issue. What else can I try? *** Stack adapter authentication failed on stack port 1 on switch 1 *** Jul 12 16:52:05.819 RP0/0: %PMAN-3-PROCHOLDDOWN: The process sif_mgr has been helddown (rc 134)Jul...
I thought 16.3(8) was just as new as 16.6(6). Do you know for sure if this bug has been fixed in the 16.6 train (where it hasn't been in 16.3?). I only ask because I'm pretty sure some of my switches came running 16.6(6) and still didn't boot proper...
I'm also having the same problem with 3650s running 16.3(8) code. Then again, half my switch stacks are working perfectly and half are not. I'm only running two models of switch and can't find any discernible pattern to why some work and some don't...
Did anyone find a fix to this? I'm deploying a bunch of 3650s and am running into the same issue. I'm running 16.3(8) on all stacks. 4 stacks are OK and 3 are showing the following error: *** Stack adapter authentication failed on stack port 1 on ...