Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I've got a new greenfield site that I'm building up and it's one of the first site that we're using 9120 APs. Our WLC is running version 8.10.130.0 and the APs connect fine, but they're not connecting to the switch with the Dot1X credentials...
Hi All, I'm hoping someone has experienced something similar and has managed to fix it. I'm running ISE 2.1 patch 3 with one PAN and two PSN (will be adding a second PAN in a few days) and testing my guest wireless portal. At this point, we just ha...
Thanks for the reply M - I saw that post as well but am still a bit confused as to how to get it to work. I installed my root CA as a IPSEC CA, but it uses an intermediate cert as well so I'm confused on how I need to get that uploaded.
KDavison, the issue we were experiencing was tied to the Aeroscout exciters and the tags not beaconing correctly. I don't have the exact details as our Aeroscout environment is managed by someone else, but essentially when they were testing the new ...
Does anyone know if the 8.3.112.7 image contains the fix for the 3800s randomly dropping location information to the Aeroscout location engine? I'm currently running 8.3MR2 because of this but finding that we are running into the one-way audio with ...
I believe I have the issue fixed. I ended up going into the hotspot portal (Work Centers > Guest Access > Configure > Guest Portal > Hotspot Guest Portal) and setting the CoA Type to Reauthenticate versus Terminate. After doing this I haven't had a...
kdavison, have you had a chance to test this? I ended up setting up a separate controller for two floors I'm testing and am running the beta code on there. I just tested the wifi phones again and found they are still experiencing the behavior. Is ...
