Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm not sure that your Cisco Prime is able to read information from your WLC, because in the screenshot you shared there are no clients connected.I suggest you to validate the signal in place and then validate your APs and Prime configs.Also, what TA...
Ok, I can see the radio color of the icon on the left access point is blue. It means the AP is not associated as you can see here:https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/user/guide/bk_CiscoPrimeInfrastructure_3_2_0_Use...
I'm also experiencing some issues with 8.5.151.0.We are using WLC5520 and 2802i APs, WLAN is configured with WPA2-Enterprise and FlexConnect local switching.Devices seems to be roaming more than normal, even when standing, the devices roams frequentl...
If you apply the template from Cisco Prime you don't need to make any changes on WLC. CPI will do that for you.Please refer to the user guide:https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/user/guide/pi_ug/config-temp.html#29...
