11-07-2019 10:11 AM - edited 07-05-2021 11:16 AM
Hi All,
Any environment facing problems with code 8.5.151.0 ? In our workplace, a lot of users have been complaining reg slow performance. Is there any solution to this? Any suggestion would be helpful.
Thank you!
Solved! Go to Solution.
11-08-2019 04:27 AM
11-07-2019 10:14 AM - edited 11-07-2019 10:14 AM
What code you were before ?
We are using 8.5.140.0 for a long time and did not hear about slow peformance
HTH
Rasika
11-07-2019 02:39 PM
We migrated back to 8.2.151.0 after having issues from 8.3 code.
11-07-2019 03:47 PM
11-07-2019 01:12 PM
11-07-2019 01:53 PM
Everything seems normal from the controller end, but the users have been complaining about the speed.
radios - mostly 2.4 GHz
data rate - Ethernet 1000 & 5000 Mbps enabled
The users having problems are on flex-connect mode.
11-07-2019 02:22 PM
11-07-2019 02:36 PM - edited 11-11-2019 08:35 AM
Yes. WLC 5520 connected to 7k lan vdc
11-07-2019 09:00 PM
11-08-2019 03:55 AM
I'm also experiencing some issues with 8.5.151.0.
We are using WLC5520 and 2802i APs, WLAN is configured with WPA2-Enterprise and FlexConnect local switching.
Devices seems to be roaming more than normal, even when standing, the devices roams frequently (every exact 5 minutes). But this seems to not always be truth, sometimes session to AP takes more time to end.
I've made changes to the session timeout timer and seems better now, but still not the best performance.
As per the reports here, I'm thinking on downgrading to 8.5.140.0.
11-08-2019 04:27 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide