Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
We are trying to enable link aggregation (LACP) between Cisco chassis 7613 and Cisco 3560G with below mentioned configuration, please advice if any mistake we have done.
Cisco Chassis - 7613
interface Port-channel3ip address 192.168.70.1 255...
Hi all,
We have cisco 3945 router with 45mbps of BW and we have around 40 PCs in our lan, we need to create a ip based bandwidth capping, ex 192.168.10.2 should get 2mbps of speed and 192.168.10.3 should get 3mbps of speed.
Please advice.
Hi Ahmed,
Thanks for the reply, yes we have changed to 205 vlan and configured ip on Cisco 7613 and same done @3560 also, but still we are able to get 1000mbps only.
Hi ahemd,
Thanks for the reply, the network which is 192.168.70.0/24 it has connected to 205 vlan, if we change to L3 and configuring as you said, what we can do for vlan 205.
