Hi, I came across a route-map statement on the config. of router A peering through EBGP to router B. ! neighbor <router B's IP> route-map PREF in ! route-map PREF permit 10 match community 10 set local-preference 110 ! route-map PREF permit 20 mat...
Hi, Is anyone aware of the limit on number of outbound VPN Client[Cisco or Nortel] sessions from behind a Cisco 2800 series router[running IOS release 12.3T]. Thanks,Rajesh
Hi, I am trying to find examples for configuring CPU/Memory Thresholding and Control Plane policing features on the new 2800,3800 series routers. Has anyone been successful in doing this? Thanks,Rajesh
I have been using the 3CDaemon utility [Ver 2.0, Rev 10] for loading IOS images on routers/switches. Recently, I upgraded several PCs on the network to Windows XP [SP-2] after which I am seeing compatibility issues with 3CDaemon including inability...
Roger, Thanks. Without the last permit statement, would all other prefixes be dropped or simply ignored and passed through? Assuming router A is running IBGP with other routers in its AS, wouldn't it advertise EBGP learned prefixes to IBGP ...
Yes, I am trying NAT-Transversal[UDP:10,000]. Is there a specific IOS version required for this function? In the past, a second VPN Client session from behind a 2600 router would terminate the first session. Thanks,Rajesh
We have not experienced any problems either with VPN over Cisco APs. It is only with the home-brand wireless routers. The VPN Client version is just 4.0.5[released July, 2004]. Thanks, Rajesh
The wireless client adapters are not integrated; they are mostly Linksys & D-Link. Half of the users run XP with SP-2 & the other half run SP-1. Thanks, Rajesh
The router itself is running IOS ver 12.3(1)a [IP/FW/IPSec/3DES feature set]. The trouble is that for one user this works fine but for multiple users attempting to VPN to their network simultaneously it doesn't as only one user connect at any poin...