I would like to know the mac highlighted below is the physical mac address of the interface and how it could be the same on two diff interfaces?ASW2#sho int Gi4/43GigabitEthernet4/43 is up, line protocol is up (connected)Hardware is Gigabit Ethernet ...
Dear All,I am new to cisco network. I want to MAP for LAN IP address to a single Global IP Address on PIX 502e. what are the possible ways to do that ?Thanks in advance
Hi All,I am new on cisco and now reading the OSPF and have some confusion in STUB area and OSPF NSSA area my confusion are as..1. where is the exit point os stub area ( Always in Area 0 ). and if the OSPF stub area Exit point is not in Area 0 but to...
Hi All,I am new to the cisco IOS. As all know that there are two ways to configure the static route.asIP route 10.0.0.0 255.255.255.0 < next Hop IP Address >andIP route 10.0.0.0 255.255.255.0 < Exit Interface >.Can anyone explain the diference betwe...
Dear All,I am new on cisco technology. I have a core switch of 4500 series. some system are generating the traffic Extra LAN traffic. how i can monitor on switch that which system is generating the traffic,thanks in advance
Hi,I am not getting why u mention the line 10 deny ip any 10.0.0.0 0.0.0.255.And you have set your next hop to the same range.If i am not wrong this ACL is blocking the packet before reaching to the Next hop..Kindly let me know if i m wrong..
