Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible to stack, via stackwise two different 3750 chassis types? For example, if both switches are running the same IOS can I utilize stackwise to connect aWS-C3750G-12S (12 SFP ports) and a 3750G-24TS-1U (24 Ethernet ports) Thanks
I recently installed a 2951 with a security plus license..I hate it (security featuers not router) and would like to put the asa back in place.I need some direction on how to integrate the asa with the 2951, I believe I need to run it in multi contex...
Where can I find more information on the firewall portion of the 2951 ISR gen2 ?I am having issues with dropped passive FTP traffic. I can initiate a session, begin a transfer then it fails.On the recieving FTP server or PC end you can see that a fil...
zulqurnain is correct, you cannot add a hostname to an ACL it has to be an IP address. The only way to filter traffic is by adding the IP address and ports of hostename.com to the ACL.
Attached is the config I have been using to address the FTP issue.The server at 69.xxx.xxx.21 is an active budirectional FTP serverThe server at 69.xxx.xxx.19 only uses FTP to send data out.############################################################...
Are they all on the same network? It sounds like you need 3 VLAN's plus you DMZ setup 1. VLAN for APPS, and DB (Production) 2. VLAN for Development 3. VLAN for Staging
I did this on my ASA 5510, It can be done but not dynamically (ASA or router can not import it from some other place), you have to create the IP list line by line in a text editor then past it to your device.
