Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Team,
I was able to login to new cisco 9300 switch with local credentials, post adding the switch in TACACS , the switch is accessible using TACACS credentials which is working as expected.
But i would like to access the switch with local credenti...
Hi All,
I am tying to get my new AP AIR-AP1562I-E-K9 installed in our airport and its mounted and learning in switch CDP neighbor but its not getting registered in WLC
switchname#sh cdp nei Gi1/0/48 det-------------------------Device ID: AP3473.2DA2....
Hi Team,
Can you help me to verify what process is making memory overutilization in my ISE server.
ise-mgt01/admin# show memory total memory: 98833168 kBfree memory: 1853356 kBcached: 30809084 kBswap-cached: 13292 kB
output of free command:total used...
Hi,
I would like to monitor Cisco ISE via solarwinds and need to enable SNMP v3 on ISE.
Can anyone help with the commands for 3.0 .
I tried with below commands, but it as king remote engine ID. What it will be?
ise-mgt01/admin(config)# snmp-server ho...
HI Team,
I have an issue with our network. We are using WLC8540 with version 8.5.161.0 and APs with model AIR-AP1572EAC-A-K9.
Two of the APs which were working earlier is now showing as Downloading and stuck there.
We did a hard reboot of APs , still...
This is exactly i configured, but fallback not happening if i remove switch ip from device group in tacacs server, but if tacacs server is failing then local will work as expected. As per others opinion , cisco switch will never fallback when switch ...
I made some config changes in tacacs server as well and my read only users are not able to go to enable mode, can you tell me which privilege level and shell pivilege value , i can give , so that users should only see show copmmands, but not to go to...
Hi ,
I have modified a little bit
aaa authentication login default group cppm-grp localaaa authentication enable default group cppm-grp enableaaa authorization exec default group cppm-grp if-authenticatedaaa authorization commands 0 default group cpp...
