Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I need some help im configuring a Cisco ASA in combination with Meraki SwitchOn the ASA i have configured some vlan interfaces for example vlan 4 (no dhcp)now i connect the interface vlan 4 to the switch port 1 in trunk mode native vlan 1 and...
We have rebuild a Cisco ASA 5508-X with a backup config, now we fase the issue that when we do a reload everything works but after 3-5 minutes no internet connection to the end-user devices/servers and no subnet connection between the subnets(vlans),...
I have a problem with Cisco Firepower users not showing on ASA FirePOWER Reporting Page.
We have LDAP enabled, do we need to do more to be able to see the users in the reporting page?
I have enter in the LAN IPthe ip address XXX.XXX.4.XXXvlan to 4subnet 255.255.255.0Gateway XXX.XXX.4.1 (ip address of the interface of the asa with vlan 4 setup)DNS XXX.XXX.4.XXX
