Hi everyone, I own a Cisco 2811 with 2 ethernet interfaces and 1 Hwic ADSL. Until last month it was configurated in PPPOA, but my ISP has recently swithced my conection on a new PPPOE multiplexer. I tried different PPPOE configurations i found onlinet, but i can't connect the router in internet. My PPPOA configuration is: interface ATM0/0/0 no ip address no atm ilmi-keepalive pvc 8/35 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 ip address negotiated ip mtu 1492 ip flow ingress ip nat outside ip virtual-reassembly in encapsulation ppp dialer pool 1 dialer-group 1 ppp pap sent-username aliceadsl password 7 060703284F4B081D161B ppp multilink no cdp enable The best PPPOE configuration i tried is (i can see the int dialer0 up): interface ATM0/0/0 no ip address no atm ilmi-keepalive hold-queue 224 in ! interface ATM0/0/0.1 point-to-point pvc 8/35 pppoe-client dial-pool-number 1 ! ! interface Dialer0 ip address negotiated ip mtu 1492 ip flow ingress ip nat outside ip virtual-reassembly in encapsulation ppp dialer pool 1 ppp authentication pap callin ppp pap sent-username aliceadsl password 7 060703284F4B081D161B ppp multilink no cdp enable Can you help me? I really don't know what i have to change in my configuration. Thank you
... View more
