About wirelessadvisors

wirelessadvisors · 07-25-2014

i have a synology nas with 4 1GB ports and a Dell R710 server with 8 ports I want to Configure Link Aggregation so i configuredport 13-20 = 8 ports port channel group 1 onport 21-24 = 4 port channel group 2 on nothing on the switch can speak to th...

wirelessadvisors · 03-22-2011

Kit List2* WS-C2960S-24PS-L2* GLC- SX-MM Fibre Modules1 * 2m Multi-Mode Duplex Fibre Patch Cable,50/125 OM3, LC-LC, Aqua1 * 4m Multi-Mode Duplex Fibre Patch Cable,50/125 OM3, LC-LC, AquaWe have setup a fibre link between two offices under 100M Range...

wirelessadvisors · 03-28-2011

I have tried bothswitch to switch lc -lcand over the two buildings same resultgetting new cables todayThanksJohn

wirelessadvisors · 03-26-2011

One SFP lights up the otherside stays downif i swap the cable ends the other switch comes upahhhhhhhhhhhelp

wirelessadvisors · 03-24-2011

the issue behind the Fibre link doesn’t come up, is a faulty SFP installed on one side of your switches…Installing the SFP on the switch #1, we are able to see the interface coming up with no issues, but on the other side, there is no indication or ...

wirelessadvisors · 03-22-2011

I'm using 12.2(53)SE not covered in link belowbug associated with 2960S platform, see belowhttp://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtk54457

wirelessadvisors · 03-22-2011

Switch 1GigabitEthernet1/0/25 is down, line protocol is down (notconnect) Hardware is Gigabit Ethernet, address is c062.6b02.2f19 (bia c062.6b02.2f19) MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255...

Member Since	‎03-22-2011 08:22 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	7

User Statistics

User Activity

Cisco Port Aggregation

Cisco 2960s fibre Issue

Re: Cisco 2960s fibre Issue

Re: Cisco 2960s fibre Issue

Re: Cisco 2960s fibre Issue

Re: Cisco 2960s fibre Issue

Re: Cisco 2960s fibre Issue