Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone,hope everything is ok.Guys, today my colleagues from WinTel team move blade server from one chassis to one other and after that, no network connectivity;The configuration was applied at the blade switch slot/port configuration that sho...
Hi guys,I've a problem with a router 2811:Upgrade ROMMON initialized program load complete, entry point: 0x8000f000, size: 0xcb80 program load complete, entry point: 0x8000f000, size: 0xcb80 program load complete, entry point: 0x8000f000, size: 0xe36...
Hi all,I using the CSS 11500 sg0750004 (07.50.0.04) to balacing requests between two web application servers, but the after applied the configurations, the balancing requests don't occurs as expect, see the configuration applied:service SAPSRV1_8000 ...
about the line "Compact Flash:not present", occurs because during some tests I removed the CF to force boot only via usb key. anyway, when I tried to boot with CF present or not, I received the same error.I found on TAC page some issues that can matc...
Well,I received this router with this fault and, when I start this router first time in my desk, I received the errors - sent previously;I think that the problem occurs after image upgrade;I started the process to getting more information about this ...
Sorry Peter,to boot via usb key, I used the command below:BOOTLDR=usbflash0:c2800nm-spservicesk9-mz.124-25f.binboot usbflash0:c2800nm-spservicesk9-mz.124-25f.bin
I using rommon debug mode and get this information below:rommon 1 > confreg Configuration Summary (Virtual Configuration Register: 0x2100)enabled are:load rom after netboot failsconsole baud: 9600boot: the ROM Monitordo you wish to change...
