Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Cisco!
so we have a situation about configuration between cisco and juniper.
Cisco we use: WS-C4506
Juniper we use: EX8208
we have to connect 2 switches to do CORE layer for our network.
so we use 2 function on this switches:
+ Spanning Tree: ...
Hey Team!
So we have a problem about AIR-cAP1702I-E-K9 need your support:
1- Following datasheet AIR-CAP1702I-E-K9 ( http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1700-series/datasheet-c78-732347.html) we see transmit power of AP ...
Hi team!
in all switch cisco, what's product can block traffic ddos/dos, tcp/udp scan?
If don't have swwitch then cisco has solution solve this problems?
Thanks!
Dear Cisco!we deploy SG300 with layer 3 function, and we create 2 VLAN:VLAN A for IP: 192.168.16.0/24VLAN B for IP: 172.168.0.0/16And we config DHCP Server on SG300 for VLAN B. VLAN B for wirelesswhen we follow SG300 working we see DHCP Server on SG3...
Dear Paul!
Thanks for updating information!
So with VLAN 1 i'm using command "native vlan 1" on Juniper to vlan 1 on juniper then we can ping vlan 1 on Cisco
Same you said we should upgrade Juniper to fix this error?
So you think we can create new vl...
Dear Mark Malone!
Firepower can block traffic DDoS/DoS, but we can see this function on datasheet ???
And if we chose ASA5516-FTD-K9 then we chose what's license to block traffic DDoS/DoS ?
Dear Jcarvaja!We try config same you said.: Saved: Written by cisco at 23:51:41.749 UTC Sun Aug 26 2012!ASA Version 8.4(2) !hostname ASA84enable password 8Ry2YjIyt7RRXU24 encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Ethernet0/0 nameif in...
