Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does anyone know if it's possible to configure pppoe over one of the fast ethernet interfaces on the 887VW (VDSL2 ISR)? I've tried this with an 857W, but never been able to get it to work (Presumably because the 857W only supports the WAN over the AT...
I have a CSM server currtnely authenticating locally that I wish to change to authenticate against a Cisco ACS server.The ACS server has the schema loaded for CSM. And the apps are all registered (Via the CiscoWorks config panel on the CSM server).I ...
Has anyone out there managed to get a multi-context FWSM module to enable polling of SNMP (RO) counters on any of the defined contexts?I can't get it to work. Despite having the appropriate snmp-server statements in the config. The same statements th...
I got an FWSM that I'd like to try using Trusted Flows Acceleration on. The docs say to use the service-acceleration command, but it just complains that I don't have the required license key. sh version says Service Acceleration is 'Disabled'. My ven...
Hi All, I would like to know how configure 2 LMS management server to fail-over from a LIVE enviornment to a DR environment. is there any best practice procedure? Moreover, I was wondering if it is possible to configured LMS in order to use one IP-ad...
The V does connect in theory (It's for a BT Infinity Business installation). But I want a secondary option if I need to put the OpenReach modem back on (The Huawei 612). Or want to connect via a separate attached 3G modem for backup. H
OK.I found one of the problems was due to the fact that CSM had FQDN's but ACS had short names that sometimes don't coincide with the actual box name... Sigh. So I've addressed that for the routers/switches.However FWSM's with multiple contexts are c...
Solved!!!!Looks like the admin context snmp settings affect all the other contexts as well.The admin context had a different listen port set for the snmp server bysnmp-server listen-port 163changing that tosnmp-server listen-port 161in the admin cont...
Nope. It's configured for poll. I've also tried trap and poll together... And as an experiment, just trap. Nothing doing...I've also got rules allowing the manager to access SNMP anywhere... And that works. It's only SNMP TO the contexts that doesn't...
Today I've been told that TFA (service acceleration) has been cancelled and will not be shipped in any future release.Has anyone else heard that? And do you know what we can do now for scalability. TFA was supposed to take the throughput from 6Gpbs t...
