Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello All,what is the best practise for Interrupt Remapping :found this doc https://supportforums.cisco.com/docs/DOC-23667 FOR Right now, should we still disable? any information about this
Please HelpUCSM : 1.4 (3l)Storage FC Ports : fc2/1, fc2/3, fc2/5error : fc2/5 B(nxos)# sh interface fc 2/5fc2/5 is down (Link failure: NOS received)------------------------------------------------------------------------------------------------------...
Helloo All,One of our uplink ethernet FI-6120 connected to J*N*R switch..1. when we set the J*N*R switch port to trunk mode, the uplink ethernet always down,(we test the connection using ping) how to solved this ? or any basic information?2. right n...
Hello Allwe need help for C460 with BCM57711#our enviromentsC460 M2 E7-4807, 64Gb RAMWindows server 2003 x64 enterprise edition (yes we know that cisco not support this OS) BCM57711 this is the symptom :1. driver allready install2. plug to Cisco Swit...
we are looking driver for " cisco alpine scsi enclosure device "Our enviroment are : C460 M2 Windows server 2003 X64 Enterprise edition R2 SP2 LSI CONTROLLER 9260-8iBest regards
Hello Rafael,i just want to sharing For initial configuration i always use DHCP, this is my toolFor 1or2 Cisco UCS C-series if more then 3 just add the switch1. laptop2. Cat6 cable (cross/straight its ok3. tftpd32 step:1. plug cat6 cable to laptop NI...
Thank u chaausti and Abhinav ....For the problem no 1 its solved We also configure hard pinning... and we will change to soft pinning..for L2-disjoint, we already add the vlans correctly to the correct uplink interfaces...on all vnic we only use one ...
Hi Abhinav, Thank u for your respon..1. there is only one permitted vlan on the uplink. and on the J* switch we already configured to allow the vlan. is there any configuration added to J* switch ?2. yes ... we have 3 ethernet uplink to cisco switch ...
