Hmm, if the SP SIP gear supports RFC2833 dtmf method then what you really want on the CUBE dialpeer is dtmf-relay rtp-nte. Some consider RFC2833 to be inband as dtmf digits are carried in the RTP stream (using a different payload type than voice)Inf...
Hi Tiberie,Not sure why would you want to do that but in that case you want to configure no dtmf-relay CLI under dialpeer to carry the dtmf digits in the voice codec.HTH,DK
From problem description it seems the incoming call has DNIS 50XXand is using dialpeer 5000 for outbound leg to CUE (:172.16.31.2 ??)where its being handed over to VM app instead of AA.(VM trigger matchingwith DNIS) That's all speculation based on i...
//219/88A39DCF8117/CCAPI/ccCallDisconnect: Cause Value=127, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=65) 65=Bearer Cap Not ImplementedCan u pl. try a test by configuring codec g711ulaw instead of g711alaw under xlite/sip E...
ha! ha! Thx God for Google!Yeah, I included .loads suffix as 9951 isn't supported until CME 8.5and I knew u were gonna need it...One more thing that I shd add is that currently CME does not supportvideo on 99xx and its planned for future release (8.6...