Hello, I have not solved this and I hope Cisco will do something about it. It looks like they just leave it as it is. Why should I need to call them, I described my problem, they can test themselves and look for a solution. Why don't they create their own ticket and work on it? I'm very disappointed in their way of answering and solvings, what is this forum for? I guess only for users who can give their own oppinions and solutions to eachother. Cisco should take their responsibilities and update the firmware for us. ... View more

OK, thanks for the help and co-work to try this out in your lab. I will wait for your answer. Kind regards, Ryan ... View more

Hello, See my answers below: >>Please confirm how your router RV042G WAN ports gets configured (static/DHCP or PPOE connection)? The WAN port gets a public IP address from my ISP provider. WAN1 Obtain an IP automatically >>Also confirm, what type of IP configuration (LAN or static IP) need to be configured for your digicorder connection? Now my cable modem is attached to a 5 port gigabit switch, from there an utp cable is connected to my WAN1 port of the router and another utp cable from that switch is connected directly to my digicorder, it seems that this digicorder is recognized by the provider and it gets a LAN address from them such like 10.x.x.x So what I would like to do is to connect this digicorder to my Cisco router and then it should go through this router's DMZ to the cable modem where it gets that IP from the provider. So I would like to eliminate the switch between the modem and router if possible. But if the digicorder would get an IP from the router then I think it will not work. Regards, Ryan ... View more

Hello Kenny, thank you very much for this information. I will try this out and I hope Cisco will open a ticket to solve this in their GUI webinterface. I'll let you know if it helps. Best regards, Ryan ... View more

This is indeed the way i did it too and it worked for me Sent from Cisco Technical Support iPad App ... View more

Well, I will have to call the center in Belgium tomorrow. But tell me what to do if they ask me to ship it to them? Do I first get a replacement unit or do I have to search for a solution myself? I hope you can imagine that it is not evident to have no internet/router in my network. Regards, Ryan Sent from Cisco Technical Support iPhone App ... View more

Well, then it is time that the labs overlook this firmware again please. ... View more

I have a APC UPS in front of the router model CS500 so this can't be the issue. Why is everyone ignoring my remark that there is something wrong with the firmware of these units? Why don't the engineers dig out this or review the firmware, and take a good look at the services. All the other settings were intact, all fine, even all the dhcp settings and VPN gateways. Only the services were corrupt and as I mentioned before in previous topics there is a thing going on with it. regards, Ryan ... View more

Hi, But I only have 23 services yet in this service management and it already overwrites the last one. This very annoying because I want to try out this FTP problem and I cannot add a service anymore. Also there are a few services in this list which I do not use and I cannot change because these are probably defaults? Ryan ... View more