Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning,
Setup: WLC 5508, multiple AP1602 and AP1702, Prime 3.0, HP ThinClients
We have clients who are jumping between access points which causes losing the connection. Here is an example from out Prime:
When I try to check the signal in thi...
Hi there,
We try to use a Cisco 819G 4G LTE ISR with a Verizon sim card. The 819G should be the backup for an existing cable connection. We configured it and are able to ping to the internet from the 819G. If we now try to use the backup from the in...
We did a test last friday and it seemed like it fixed our issues. A stable connection was established for over 15 minutes.
Again, thank you for your help!
Thank you for your help, I'll reconfigure the 819G with your suggested lines. As I configure it remotely, it will need some time to test it again.
Anyhow, I'll let you know the result as soon as possible.
Regards
Hi Georg,
We use a Sophos UTM, the cable uplink is the preferred one, if it fails/disconnects, the UTM switches to the 819G uplink automaticly. Switching to the other uplink works like a charm on the UTM, but as soon as traffic occurs on the 819G i...
