Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have recently started testing Cisco ACS 5.2, but we are hitting an issue when we try to register a Wireless LAN Controller. Even when the device is registered on the ACS under "Network Devices and AAA Clients" we are getting the following error me...
When setting up a group in ACS 4.1, how do you include the "disable account if failed attempts exceed x" on the Group object. I see there have been some topics on this for older ACS versions (3.x) where it was not possible. Just wondering if anyone k...
Hi,We have recently upgraded our ACS servers to version 4.1(4) Build 13. After upgrade we receive a lot of error messages in our "Failed Attempts" log of the type:Authen session timed out: Challenge not provided by clientThese started right after the...
Hello,We have begun experiencing client disconnects on one of our WLAN sites. The site has several point-to-point mesh links, these have also started to fail (PAP loses connection with RAP). In the WLC trap log we see a lot of the following messages:...
Hi,We currently have 2 Cisco 1030 APs set up in a bridge connection (root to non-root). However, the signal strength constantly varies between -53dBm and -80 dBm (SNR also drops during this timeframe). We have checked the area with a frequency scanne...
Can you clarify this?We are currently Cisco ACS 4.2 on a Windows server 2003 and authenticating towards a Windows Server 2008 R2 AD domain without issues. We are authenticating both users and machine certificates. I see from the documentation that th...
We have been running cisco ACS 4.2 with latest patch on a windows 2003 server with AD authentication towards a Windows 2008 AD enviroment for a long time now with no issues. We also discovered recently that the AD group had upgraded all AD servers to...
Yes, the IP address is identical. Another issue we detected now is that this is not only affecting "Network Devices and AAA Clients", but our "Service Selection Rules" as well. We can disable rules, but the counters still increment and the rules stil...
Hi,We do have two ACSs (Primary/Secondary), authentications go to both of these (we see this in the logs). Both ACSs experience the same issue. So we are currently unable to register any new devices or change exsting ones. Currently waiting for the T...
